Showing posts with label Weaving. Show all posts
Showing posts with label Weaving. Show all posts

Saturday, September 16, 2017

Selvedges provide strength to fabric for safe handling of the fabric. Selvedge should not curl. In shuttle looms, there is no need for special selvedges; since the yarn is not cut after each filling insertion, the edges of the fabric are smooth and strong.

Fig: Normal Selvedge by Shuttle Loom

In shuttle-less weaving, since the pick yarn is cut after every insertion, there is fringe selvedge on both sides of the fabric. In this case, special selvedges are needed to prevent slipping of outside warp yarns out of the fabric. There are several types of selvedge designs that are used for this purpose with shuttle-less looms. The weaving machines need mechanisms which through the formation of sufficiently strong selvedges bind the wefts together, thus imparting to the fabric a proper appearance and solidity and preventing the breaking up of the threads on the fabric edges during the subsequent operations.

Three kinds of selvedges can be formed:
·         Tucked-in selvedges
·         Leno selvedges
·         Fused selvedges

Tucked-in selvedges:
A special hooked needle driven by a cam produces, after cutting, the insertion of the protruding thread end into the subsequent shed, thus forming a stronger edge. Tucked-in selvedge can be formed by two different methods. With most common method the projecting weft tail is tucked in the form of a hairpin to a predetermined length (10-15 mm) into the next weave shed. This gives a firm & neat selvedge. A 2/1 or 3/1 rib with two ends per heald & 2 fold yarns with about 20% finer than the body yarn number give excellent results. Sulzer Bros. were the pioneer to introduce this type of tucked – in selvedge on their projectile machines but now-a-days it is also used on rapier & air-jet weaving machines.



Fig: Tucked-in Selvedge &Tucking process

This system is generally used for light to middle weight fabrics, when weave and fabric density permit. There are also available tuck-in selvedge motions which are entirely controlled by pneumatic or mixed pneumatic and mechanical devices.


Picture: Tucking Needle (Tsudakoma Air-Jet Loom)

Leno selvedges:
These selvedges are obtained by binding the wefts with strong additional threads working in gauze weave and by eliminating through cutting the protruding weft ends.

 Fig: Leno Selvedge

The leno gauze system is optimally suited for heavy fabrics, blankets, wall coverings. Fig. A illustrates the operation scheme of the device proposed by a manufacturer, in which device two complete leno gauze mechanisms work in combination. A leno device produces the fabric selvedge, while the other device forms the auxiliary selvedge.

Fig. A : Leno creates the fabric selvedge.

Picture: Leno (Picanol Air-Jet Loom)

Chain stitch edges:
Chain Stitch edge are produce mostly on shuttle-less narrow fabric weaving machine weaving machine in which the pick is inserted by means of a needle. These machines run at a very high speed & the mechanism for forming chain does not affect high production operation. The chain stitch has not yet been used on wide weaving machines.

Fused selvedges:
These are obtained by pressing a hot mechanical element on the fabric edge; this method can be applied on fabrics in man-made fibres. Sometimes used to split wider fabrics in to narrow width fabrics.

Melt Selvedge:
This type of selvedge is also known as fused selvedge. The formation of this selvedge requires outermost ends of thermoplastic filament yarns e.g. polyester, polyamide polyolefin etc; with this method the edge ends are plasticized by means of an incandescent pin or ultrasonic & stuck together to produce a firm neat edge which does not curl up. This type of selvedge can be used with all types of weaving machines. This also requires dummy selvedge, so the wastages are high up to 2-4% depending upon the number of ends & width of fabrics.


Picture: Centre Selvedge

Devices for centre selvedges:
All these three systems allow the formation also of centre or ″ split ″ selvedges, when several lengths of cloth are woven on the same machine. 
WEAVING:
The process of producing a fabric by interlacing warp and weft threads is known as weaving. The machine used for weaving is known as weaving machine or loom. Weaving is an art that has been practiced for thousands of years. The earliest application of weaving dates back to the Egyptian civilization. Over the years, both the process as well as the machine has undergone phenomenal changes. As of today, there is a wide range of looms being used, right from the simplest handloom to the most sophisticated loom.


Classification of Weaving Machines:
Weaving machines are classified according to their filling insertion mechanism. The classification is as follows:
1. Shuttle
2. Shuttle-less

  • Projectile
  • Rapier
  • Air-Jet
  • Water-Jet
Shuttle Weaving
In shuttle weaving, a shuttle that traverses back and forth across the loom width, inserts the filling. Shuttles can be made of wood or plastic. Filling yarn is wound on the quill and the quill is placed in the shuttle. As the shuttle move across the loom, the filling yarn is unwound from the pirn and lay in the shed.

Fig: Basic Weaving Mechanism

Projectile Weaving
Projectile weaving machines use a projectile equipped with a gripper to insert the filling yarn across the machine. The gripper projectile draws the filling yarn into the shed. The Projectile glides through the shed in a rake- shaped guide. Braked in the receiving unit, the Projectile is then conveyed to its original position by a transport device installed under the shed.

Fig: Projectile Weaving

Rapier Weaving
In Rapier weaving, a flexible or rigid solid element, called rapier, is used to insert the filling yarn across the shed. The rapier head picks up the filling yarn and carries it through the shed. After reaching the destination, the rapier head returns empty to pick up the next filling yarn, which completes the cycle. A rapier performs a reciprocating motion.

Picture: Weft insertion by rapier

Rapier weaving machines can be of two types:

1. Single Rapier Machines: A single, rigid rapier is used in these machines. The rigid rapier is a metal or composite bar usually with a circular cross section. The rapier enters the shed from one side, picks up the tip of the filling yarn on the other side and passes it across the loom width while retracting. Therefore, a single rapier carries the yarn in one way only and half of the rapier movement is wasted. Also there is no yarn transfer since there is only one rapier. The single rapier’s length is equal to the width of the loom.

2. Double Rapier Machines: Two rapiers are used in these machines: one rapier, called the giver, takes the filling yarn from the yarn accumulator on one side of the loom, brings it to the center of the machine and transfers it to the second rapier which is called the taker. The taker retards and brings the filling yarn to the other side. Similar to the single rapier machines, only half of the rapier movements are used for filling insertion.

Air-Jet Weaving
The air jet weaving machines are the weaving machines with the highest weft insertion performance and are considered as the most productive in the manufacturing of light to medium weight fabrics, preferably made of cotton and certain man-made fibers (sheets, shirting fabrics, linings, taffetas and satins in staple yarns of man-made fibers); it has anyway to be pointed out that technically positive results are obtained at present also with heavy weight fabrics (denims) and that some manufacturers produce also machine models for terry production. 
Fig: Air-Jet Weaving

These machines are the ideal solution for those who want to produce bulk quantities of customized fabric styles. The weaving widths range generally from 190 to 400 cm. As regards the multicolor weft carrier, up to 8 different wefts can be fed. It has however to be considered that the air jet weaving machines require a high energy consumption to prepare the compressed air and that this consumption rises definitely with increasing loom width and running speed. The reduction in the energy consumption is in fact one of the main concerns of the manufacturers, and builds for the user an important selection criterion.

Water-Jet Weaving
A water-jet weaving machine inserts the filling yarn by highly pressurized water. The relative velocity between the filling yarn and the water jet provides the attractive force. If there is no velocity difference, then there would be no tension on the yarn results in curling and snarling of the yarn. Water-jet weaving machine can only be used for hydrophobic fibers.

Fig: Water-Jet Weaving